INTERCONNECT CABLES

“The Prospect is the latest analogue interconnect in the Neutralis line up. It is the product of much thought and process analysis in the "trickle down" process brought about by adopting a simpler geometry resulting in a less labour intensive product and thereby being more  cost effective. The philosophy and the standards in manufacturing that are part of the other Neutralis interconnects are maintained. The Prospect is a superb sounding product and as with all Neutralis products it competes with products way beyond its price point."

Objective

Designed to have minimal influence on the transmission of the audio signal within its design parameters. Totally handmade; from the first step of polishing the high purity copper conductors to finished product. Can be made to specified lengths.

Very low capacitance.

Three things determine capacitance in a cable. They are length, geometry and dielectric material. The Prospect interconnects have very low capacitance for the following reasons;
Literal air dielectric is used between the two conductors in 50% of the design. In the areas where air dielectric is not feasible, low dielectric constant materials are used. Even the outer body of the interconnect uses low dielectric constant material.
Spacing between the conductors.

Minimal skin-effect

Skin-effect occurs since the high-frequency currents tend to flow on the outer "skin" of the conductors whereas lower frequencies are more uniform in current distribution across the conductor cross-section. Correct gauge of conductors result in all frequencies flowing more evenly in the conductors, thus minimising skin-effect. Neutralis carefully selects conductor gauge to facilitate optimum frequency response across the spectrum.

Minimal use of form hugging conductor insulation

Form hugging insulation or coatings on conductors are undesirable. The dielectric material stores conductor energy as a type of charge in the same manner as capacitors retain part of the charge even after being discharged. The remaining charge in the dielectric material may be released when it is not desired. This is known as Dielectric Absorption or voltage retention. The higher the dielectric constant of the insulation the more pronounced the problem is. This is detrimental since the latent charge can lead to variance in the amount of energy required to charge the dielectric. Remaining charge can dissipate onto conductors at the incorrect time leading to "smearing" of the audio signal. The Prospect limits form hugging conductor insulation to 50% of the design with a phenomenal average dielectric constant value of 1.22. This results in The Prospect interconnect being very strong in the areas of high and low-frequency micro resolution, focus,dynamics and neutrality.

Specifications

Capacitance per foot: 4.788pF
Inductance per foot: 0.324µH
Max. Cable Diameter: 26mm at Capsule.
RCA Plug Width: 12mm
Min. Inner Bend   Radius: 55mm
Clearance required behind component: 90mm
Conductor Material: High Purity Copper
Primary Dielectric: Literal Air (50%), Gas Injected Foamed Polyethylene (Remainder)
Neutralis Clarity System: None
Terminations: RCA and XLR